Introduction
Hardware specifications | |||
MCU Chipset | MTK7620NMCU Chipset | ||
Basic Frequency | |||
Standard Compliance | 802.11N,2T2R 300M MIMO | ||
Memory | 32MB DDR RAM | ||
Flash | 4MB | ||
Standard | |||
Device Interface | 2 x 10/100Mbps Adaptive cable network Connector(-WAN,-LAN) | ||
1 x Reset Button for Load Factory Defaults | |||
5V 1A USBConnector1 x RJ11Connector(phone)一个Power Input开关 | |||
Antenna | 2.4G omnidirectional high gain2.1DBI built-in Antenna | ||
Product Size | 86mm x 86mm x 35mm | ||
Power Input |
24V POE Power Supply( standard not include POE Power Supply ) |
||
RF Wireless | |||
Basic | 802.11b/g/n: | ||
2.4`2.4835GHz | |||
Korea, ETSI, FCC communication channel is optional | |||
Modulation | OFDM=BPSK,QPSK,16-QAM,64-QAM | ||
DSSS=DBPSK,DQPSK,CCK | |||
Transmission Rate | 300 M bps | ||
Transmission Rate |
11b:-85dBm @ 8% PER 11g:-70dBm @ 10% PER 11n:-70dBm @ 10% PER |
||
Output Power |
802.11n:15dBm for OFDM mode 802.11g:17dBm for OFDM mode 802.11b:20dBm for CCK mode |
||
Software Features | |||
Working Mode | Access Point / Wireless AP / Wireless Bridge / WISP | ||
IEEE Standard | IEEE 802.3(Ethernet) | ||
IEEE 802.3u(Fast Ethernet) | |||
IEEE 802.11b/g/n(2.4G WLAN) | |||
Wireless function | Auto-Channel Selection | ||
Distance Control(802. 1 x Ack Timeout) | |||
SSID, configurable 4 at most | |||
WDS AP / WDS Bridge, BSSID | |||
Wireless Security | WEP Encryption 64/128/152Bit WEP security code | ||
WPA/WPA2 Personal(WPA-PSK of TKIP or AES) | |||
WPA/WPA2 Enterprise(WPA-PSK of TKIP) | |||
Hide SSID | |||
Wireless management | Support AC centralized management | ||
Wireless Advance Settings | Support Power adjustable, number of users access restrictions, covering the thresholds | ||
DHCP | DHCP Server,DHCP Client) | ||
Network | Port Mapping,DMZ Host,Statics Routing,DDNS,UPNP | ||
Management | Firmware Upgrade and backup,WEB management,Ping Tool | ||
Firewall | IP Address / Port / Mac / URL FILTER, ANI-DOS | ||
Log Management | Provide local log, the host log, log file transfer | ||
Restore Settings | Factory Reset,Restart | ||
Backup Function | Backup system configuration | ||
Physical properties | |||
Temperature | Working temperature:0℃~55℃ | ||
Storage temperature:-20℃~70℃ | |||
Humidity | 5%~95%(typical) | ||
Package | |||
AP hosts, of a complete set of instructions, two fixed screws |
More Products